dmesg - ML350 gen4
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-116-generic (buildd@lgw01-amd64-021) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #140-Ubuntu SMP Mon Feb 12 21:23:04 UTC 2018 (Ubuntu 4.4.0-116.140-generic 4.4.98)
Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=/dev/mapper/ML350--vg-root ro
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007fff2fff] usable
BIOS-e820: [mem 0x000000007fff3000-0x000000007fffafff] ACPI data
BIOS-e820: [mem 0x000000007fffb000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: HP ProLiant ML350 G4, BIOS D17 12/02/2004
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x7fff3 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 080000000 mask F80000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC
found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
BRK [0x02215000, 0x02215fff] PGTABLE
BRK [0x02216000, 0x02216fff] PGTABLE
BRK [0x02217000, 0x02217fff] PGTABLE
BRK [0x02218000, 0x02218fff] PGTABLE
BRK [0x02219000, 0x02219fff] PGTABLE
RAMDISK: [mem 0x3372e000-0x35b8efff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F20 000024 (v02 HP )
ACPI: XSDT 0x000000007FFF3280 000044 (v01 HP D17 00000002 \xffffffd2? 0000162E)
ACPI: FACP 0x000000007FFF3300 0000F4 (v03 HP D17 00000002 \xffffffd2? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20150930/tbfadt-704)
ACPI: DSDT 0x000000007FFF3400 001CAA (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x000000007FFF30C0 000040
ACPI: FACS 0x000000007FFF30C0 000040
ACPI: SPCR 0x000000007FFF3100 000050 (v01 HP SPCRRBSU 00000001 \xffffffd2? 0000162E)
ACPI: MCFG 0x000000007FFF3180 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: APIC 0x000000007FFF31C0 0000B6 (v01 HP 00000083 00000002 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000007fff2fff]
NODE_DATA(0) allocated [mem 0x7ffee000-0x7fff2fff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000007fff2fff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000007fff2fff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000007fff2fff]
On node 0 totalpages: 524177
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 8128 pages used for memmap
DMA32 zone: 520179 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x908
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 9, version 32, address 0xfec10000, GSI 24-47
IOAPIC[2]: apic_id 10, version 32, address 0xfec80000, GSI 48-71
IOAPIC[3]: apic_id 11, version 32, address 0xfec80100, GSI 72-95
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x80000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 34 pages/cpu @ffff88007fc00000 s99544 r8192 d31528 u262144
pcpu-alloc: s99544 r8192 d31528 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 515964
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-116-generic root=/dev/mapper/ML350--vg-root ro
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2006704K/2096708K available (8530K kernel code, 1309K rwdata, 3992K rodata, 1508K init, 1316K bss, 90004K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Kernel/User page tables isolation: enabled
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:1712 16
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 3200.359 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.71 BogoMIPS (lpj=12801436)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 1 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
FEATURE SPEC_CTRL Not Present
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
Spectre V2 mitigation: Mitigation: Full generic retpoline
Spectre V2 mitigation: Speculation control IBPB not-supported IBRS not-supported
Freeing SMP alternatives memory: 32K
ftrace: allocating 32186 entries in 126 pages
smpboot: APIC(0) Converting physical 0 to logical package 0
smpboot: Max logical packages: 8
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(TM) CPU 3.20GHz (family: 0xf, model: 0x4, stepping: 0x1)
Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
... version: 0
... bit width: 40
... generic registers: 18
... value mask: 000000ffffffffff
... max period: 0000007fffffffff
... fixed-purpose events: 0
... event mask: 000000000003ffff
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12801.43 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 2048 (order: 5, 131072 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 10:20:39, date: 04/12/18
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: Intel Corporation E7520 Memory Controller Hub with MMCONFIG support
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-02])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-02]
pci 0000:00:00.0: [8086:3590] type 00 class 0x060000
pci 0000:00:02.0: [8086:3595] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3597] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:3599] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:25ae] type 01 class 0x060400
pci 0000:00:1d.0: [8086:25a9] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x2000-0x201f]
pci 0000:00:1d.1: [8086:25aa] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x2020-0x203f]
pci 0000:00:1d.4: [8086:25ab] type 00 class 0x088000
pci 0000:00:1d.4: reg 0x10: [mem 0xfbef0000-0xfbef000f]
pci 0000:00:1d.5: [8086:25ac] type 00 class 0x080020
pci 0000:00:1d.7: [8086:25ad] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfbee0000-0xfbee03ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1f.0: [8086:25a1] type 00 class 0x060100
pci 0000:00:1f.0: quirk: [io 0x0900-0x097f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0800-0x083f] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:25a2] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 0x20: [io 0x0500-0x050f]
pci 0000:00:1f.1: reg 0x24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci_bus 0000:05: busn_res: can not insert [bus 05-0c] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:05:00.0: [8086:0329] type 01 class 0x060400
pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.2: [8086:032a] type 01 class 0x060400
pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0000:05:00.2: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 05-0c]
pci 0000:00:02.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:09:02.0: [0e11:0046] type 00 class 0x010400
pci 0000:09:02.0: reg 0x10: [mem 0xfdff0000-0xfdff1fff 64bit]
pci 0000:09:02.0: reg 0x18: [io 0x5000-0x50ff]
pci 0000:09:02.0: reg 0x1c: [mem 0xfdf80000-0xfdfbffff 64bit]
pci 0000:09:02.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:09:02.0: supports D1
pci 0000:05:00.2: PCI bridge to [bus 09-0c]
pci 0000:05:00.2: bridge window [io 0x5000-0x5fff]
pci 0000:05:00.2: bridge window [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:0d: busn_res: can not insert [bus 0d-0f] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:00:04.0: PCI bridge to [bus 0d-0f]
pci_bus 0000:10: busn_res: can not insert [bus 10-12] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:00:06.0: PCI bridge to [bus 10-12]
pci_bus 0000:02: busn_res: can not insert [bus 02-04] under [bus 00-02] (conflicts with (null) [bus 00-02])
pci 0000:02:03.0: [1000:0030] type 00 class 0x010000
pci 0000:02:03.0: reg 0x10: [io 0x4000-0x40ff]
pci 0000:02:03.0: reg 0x14: [mem 0xfdee0000-0xfdefffff 64bit]
pci 0000:02:03.0: reg 0x1c: [mem 0xfdec0000-0xfdedffff 64bit]
pci 0000:02:03.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.1: [1000:0030] type 00 class 0x010000
pci 0000:02:03.1: reg 0x10: [io 0x4400-0x44ff]
pci 0000:02:03.1: reg 0x14: [mem 0xfdea0000-0xfdebffff 64bit]
pci 0000:02:03.1: reg 0x1c: [mem 0xfde80000-0xfde9ffff 64bit]
pci 0000:02:03.1: reg 0x30: [mem 0x00000000-0x000fffff pref]
pci 0000:02:03.1: supports D1 D2
pci 0000:00:1c.0: PCI bridge to [bus 02-04]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:01:02.0: [14e4:1654] type 00 class 0x020000
pci 0000:01:02.0: reg 0x10: [mem 0xfddf0000-0xfddfffff 64bit]
pci 0000:01:02.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:02.0: PME# supported from D3hot D3cold
pci 0000:01:03.0: [1002:4752] type 00 class 0x030000
pci 0000:01:03.0: reg 0x10: [mem 0xfc000000-0xfcffffff]
pci 0000:01:03.0: reg 0x14: [io 0x3000-0x30ff]
pci 0000:01:03.0: reg 0x18: [mem 0xfbff0000-0xfbff0fff]
pci 0000:01:03.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:03.0: supports D1 D2
pci 0000:01:04.0: [0e11:00d7] type 00 class 0x088000
pci 0000:01:04.0: reg 0x10: [io 0x1800-0x18ff]
pci 0000:01:04.0: reg 0x14: [mem 0xfbfe0000-0xfbfe01ff]
pci 0000:01:04.0: reg 0x18: [io 0x1900-0x19ff]
pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfddfffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 11) *3
vgaarb: device added: PCI:0000:01:03.0,decodes=io+mem,owns=none,locks=none
vgaarb: loaded
vgaarb: setting as boot device: PCI:0000:01:03.0
vgaarb: bridge control possible 0000:01:03.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:1d.0: can't claim BAR 4 [io 0x2000-0x201f]: address conflict with PCI Bus 0000:01 [io 0x1000-0x3fff]
pci 0000:00:1d.1: can't claim BAR 4 [io 0x2020-0x203f]: address conflict with PCI Bus 0000:01 [io 0x1000-0x3fff]
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0x7fff3000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0408-0x040f] has been reserved
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0500-0x050f] has been reserved
system 00:00: [io 0x0700-0x071f] has been reserved
system 00:00: [io 0x0800-0x083f] has been reserved
system 00:00: [io 0x0900-0x097f] has been reserved
system 00:00: [io 0x0c80-0x0c83] has been reserved
system 00:00: [io 0x0cd4-0x0cd7] has been reserved
system 00:00: [io 0x0f50-0x0f58] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:03: [dma 0]
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 PNP0500 (disabled)
pnp 00:06: [dma 2]
pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
clocksource: Switched to clocksource acpi_pm
pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x80100000-0x801003ff]
pci 0000:00:1d.0: BAR 4: assigned [io 0x6000-0x601f]
pci 0000:00:1d.1: BAR 4: assigned [io 0x6020-0x603f]
pci 0000:05:00.0: PCI bridge to [bus 06-08]
pci 0000:09:02.0: BAR 6: assigned [mem 0xfdf00000-0xfdf3ffff pref]
pci 0000:05:00.2: PCI bridge to [bus 09-0c]
pci 0000:05:00.2: bridge window [io 0x5000-0x5fff]
pci 0000:05:00.2: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:02.0: PCI bridge to [bus 05-0c]
pci 0000:00:02.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.0: bridge window [mem 0xfdf00000-0xfdffffff]
pci 0000:00:04.0: PCI bridge to [bus 0d-0f]
pci 0000:00:06.0: PCI bridge to [bus 10-12]
pci 0000:02:03.0: BAR 6: no space for [mem size 0x00100000 pref]
pci 0000:02:03.0: BAR 6: failed to assign [mem size 0x00100000 pref]
pci 0000:02:03.1: BAR 6: no space for [mem size 0x00100000 pref]
pci 0000:02:03.1: BAR 6: failed to assign [mem size 0x00100000 pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-04]
pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.0: bridge window [mem 0xfde00000-0xfdefffff]
pci 0000:01:03.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
pci 0000:01:02.0: BAR 6: assigned [mem 0x80020000-0x8002ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 01]
pci 0000:00:1e.0: bridge window [io 0x1000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfddfffff]
pci 0000:00:1e.0: bridge window [mem 0x80000000-0x800fffff pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
pci_bus 0000:05: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:05: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:09: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:09: resource 1 [mem 0xfdf00000-0xfdffffff]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
pci_bus 0000:01: resource 0 [io 0x1000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfddfffff]
pci_bus 0000:01: resource 2 [mem 0x80000000-0x800fffff pref]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:01: resource 7 [mem 0x80000000-0xfebfffff window]
NET: Registered protocol family 2
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
UDP hash table entries: 1024 (order: 3, 32768 bytes)
UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
NET: Registered protocol family 1
pci_bus 0000:05: writes to ASPM control bits will be ignored
pci 0000:00:1d.5: disabled boot interrupts on device [8086:25ac]
pci 0000:05:00.0: rerouting interrupts for [8086:0329]
pci 0000:05:00.2: rerouting interrupts for [8086:032a]
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 37252K
platform rtc_cmos: registered platform RTC device (no PNP device found)
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1523528440.147:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x24, linelength=1920, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xfc000000, mapped to 0xffffc90000400000, using 960k, total 960k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (8 C)
GHES: HEST is not enabled!
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial 00:05: unable to assign resources
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ata_piix 0000:00:1f.1: can't derive routing for PCI INT A
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfbee0000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-116-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ata2.00: ATAPI: HL-DT-STDVDRRW GWA-4162B, E286, max UDMA/44
ata2.00: limited to UDMA/33 due to 40-wire cable
ata2.00: configured for UDMA/33
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRRW GWA-4162B E286 PQ: 0 ANSI: 5
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006020
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.4.0-116-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos rtc_cmos: RTC can wake from S4
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one year, y3k, 114 bytes nvram
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0xf41, pf=0x1, revision=0xd
microcode: CPU1 sig=0xf41, pf=0x1, revision=0xd
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: aa84f01984fbd529c105810b59e379d349698248'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 14:219:325
rtc_cmos rtc_cmos: setting system clock to 2018-04-12 10:20:40 UTC (1523528440)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
usb 1-3: new high-speed USB device number 2 using ehci-pci
usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-3: Product: USB 2.0 Hub
hub 1-3:1.0: USB hub found
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/40x writer cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
hub 1-3:1.0: 4 ports detected
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg0 type 5
Freeing unused kernel memory: 1508K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1700K
Freeing unused kernel memory: 104K
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
tsc: Refined TSC clocksource calibration: 3200.121 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e20bbfa89c, max_idle_ns: 440795205530 ns
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 4 bits of entropy available)
usb 1-3.2: new low-speed USB device number 3 using ehci-pci
Floppy drive(s): fd0 is 1.44M
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
FDC 0 is a National Semiconductor PC87306
HP CISS Driver (v 3.6.26)
cciss 0000:09:02.0: PCI IRQ 72 -> rerouted to legacy IRQ 16
cciss 0000:09:02.0: Controller reports max supported commands of 0, an obvious lie. Using 16. Ensure that firmware is up to date.
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
usb 1-3.2: New USB device found, idVendor=04b3, idProduct=3025
usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-3.2: Product: USB NetVista Full Width Keyboard.
usb 1-3.2: Manufacturer: LITE-ON Technology
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
Fusion MPT SPI Host driver 3.04.20
mptbase: ioc0: Initiating bringup
cciss 0000:09:02.0: cciss0: at PCI 0000:09:02.0 IRQ 16 using DAC
PTP clock support registered
usb 1-3.4: new low-speed USB device number 4 using ehci-pci
tg3.c:v3.137 (May 11, 2014)
cciss/c0d0: p1 p2 < p5 >
scsi host2: cciss
usb 1-3.4: New USB device found, idVendor=04b3, idProduct=310c
usb 1-3.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-3.4: Product: USB Optical Mouse
tg3 0000:01:02.0 eth0: Tigon3 [partno(349322-001) rev 3003] (PCI:33MHz:32-bit) MAC address 00:13:21:1b:cb:e8
tg3 0000:01:02.0 eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0], EEE[0])
tg3 0000:01:02.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:01:02.0 eth0: dma_rwctrl[763f0000] dma_mask[64-bit]
tg3 0000:01:02.0 enp1s2: renamed from eth0
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: LITE-ON Technology USB NetVista Full Width Keyboard. as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.2/1-3.2:1.0/0003:04B3:3025.0001/input/input4
hid-generic 0003:04B3:3025.0001: input,hidraw0: USB HID v1.10 Keyboard [LITE-ON Technology USB NetVista Full Width Keyboard.] on usb-0000:00:1d.7-3.2/input0
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3.4/1-3.4:1.0/0003:04B3:310C.0002/input/input5
hid-generic 0003:04B3:310C.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.7-3.4/input0
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
clocksource: Switched to clocksource tsc
scsi host3: ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=24
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi host4: ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=25
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
raid6: sse2x1 gen() 2324 MB/s
raid6: sse2x1 xor() 1682 MB/s
raid6: sse2x2 gen() 3545 MB/s
raid6: sse2x2 xor() 2069 MB/s
raid6: sse2x4 gen() 3368 MB/s
raid6: sse2x4 xor() 2044 MB/s
raid6: using algorithm sse2x2 gen() 3545 MB/s
raid6: .... xor() 2069 MB/s, rmw enabled
raid6: using intx1 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 5866.000 MB/sec
generic_sse: 5804.000 MB/sec
xor: using function: prefetch64-sse (5866.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
Btrfs loaded
random: nonblocking pool is initialized
blk_update_request: I/O error, dev fd0, sector 0
floppy: error -5 while reading block 0
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from D-Bus machine ID.
systemd[1]: Installed transient /etc/machine-id file.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Started Trigger resolvconf update for networkd DNS.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Set console keymap...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Created slice system-postgresql.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Read required files in advance.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Nameserver information manager...
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
Loading iSCSI transport class v2.0-870.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on fsck to fsckd communication Socket.
iscsi: registered transport (tcp)
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Journal Service.
iscsi: registered transport (iser)
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[412]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden
parport_pc 00:03: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
8250_fintek: probe of 00:05 failed with error -16
intel_rng: FWH not detected
ppdev: user-space parallel port driver
audit: type=1400 audit(1523528471.706:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1523528471.710:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1523528471.710:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1523528471.710:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=604 comm="apparmor_parser"
audit: type=1400 audit(1523528471.774:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=784 comm="apparmor_parser"
Adding 999420k swap on /dev/mapper/ML350--vg-swap_1. Priority:-1 extents:1 across:999420k FS
audit: type=1400 audit(1523528472.462:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default" pid=603 comm="apparmor_parser"
audit: type=1400 audit(1523528472.466:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-cgns" pid=603 comm="apparmor_parser"
audit: type=1400 audit(1523528472.466:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-mounting" pid=603 comm="apparmor_parser"
audit: type=1400 audit(1523528472.470:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-container-default-with-nesting" pid=603 comm="apparmor_parser"
audit: type=1400 audit(1523528472.502:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=787 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): enp1s2: link is not ready
tg3 0000:01:02.0 enp1s2: Link is up at 100 Mbps, full duplex
tg3 0000:01:02.0 enp1s2: Flow control is on for TX and on for RX
IPv6: ADDRCONF(NETDEV_CHANGE): enp1s2: link becomes ready
audit_printk_skb: 18 callbacks suppressed
audit: type=1400 audit(1523528482.342:18): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1149/status" pid=1149 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=107 ouid=107
audit: type=1400 audit(1523528482.342:19): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=1149 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=107 ouid=0
audit: type=1400 audit(1523528482.342:20): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/1149/status" pid=1149 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=107 ouid=107
perf interrupt took too long (2521 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
CPU1: Core temperature above threshold, cpu clock throttled (total events = 1)
CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
mce: [Hardware Error]: Machine check events logged
CPU0: Core temperature/speed normal
mce: [Hardware Error]: Machine check events logged
CPU1: Core temperature/speed normal
perf interrupt took too long (5014 > 5000), lowering kernel.perf_event_max_sample_rate to 25000